Avalanche Control Configuration

REQUIREMENTS
Permission	Operation Administrator and higher
Connectivity	Online only

Fig. 1: Administration menu for operation administrator.

This page explains how to configure data entry for the avalanche control extension. See the avalanche control workflow module for configuration information for the avalanche control extension workflow module used for planning prior to field operations. The configuration is found in 'Operation Settings' accessed from the administration menu (cog wheel) (Fig. 1).

Background

Fig. 2: Avalanche Control Extension Data Entry Configuration in Operation Settings.

The avalanche control configuration (Fig. 2) allows you to specify the settings you would like to use for your avalanche control data entry.

However, before you can successfully configure your data entry for this extension you must ensure your location catalog is set up to allow this.

In your location catalog you need to do the following:

• Add your control routes. You can add photos to control route locations. These photos appear on the control route data entry screen for reference but CANNOT be drawn on using the photo overlay drawing functionality.
• Add your avalanche paths as child locations of your control routes, or drag and drop existing avalanche paths to be under their parent control route. Photos can be added to avalanche path locations and CAN be drawn on using the photo overlay drawing functionality during data entry.

Step-by-step description

1.	Select 'Operation Settings' from the administration menu (cog wheel) near the top right corner of the screen (Fig. 1).
2.	Scroll down to the Run List Status Configuration section (Fig. 1).
3.	To edit a rating: Select the rating you would like to change by clicking on its row in the table. Click on the button above the top left corner of the user table. This will open a small popup window (Fig. 2). Edit the information provided in the pop-up window. Click on OK to save your changes. To add a new rating: Click on the button above the top left corner of the user table. This will open a small popup window (Fig. 2). Enter the information requested in the pop-up window. Click on OK to add the new rating to your list. To delete a rating: Select the rating you would like to delete by clicking on its row in the table. Click on the button above the top left corner of the user table. This remove the rating from your list. ISSUE Attempting to delete a rating currently results in an error message and therefore is not possible. Workaround: None available. JIRA: -RR-231 (Dec.2, 2014)
4.	The changes are immediately applied to your settings. You can move on to any other section of the application.

Related documents

Other operational settings

• Specifying the operational setting for entering and submitting observations
• Specifying the status ratings for the run list module (additional subscription required)
• Configuring the avalanche control extension (additional subscription required)

Run list extension

• Specifying the status ratings for the run list module
• Run list workflow module

Functionality tested by

• Nov. 8, 2014: Pascal Haegeli